DIY Wall Beading: Step‑by‑Step Panelled Wall Effect
Create a panelled wall effect with simple wall beading . This quick DIY adds character to living rooms, bedrooms, and hallways, and works with both classic and modern interiors. You’ll need: ● Decorative moulding/beading ● Large sheets of paper ● Chalk and low‑tack masking tape ● Tape measure, spirit level, plumb line (optional) ● Small hacksaw and mitre box ● Fine sandpaper ● Paint for the moulding ● Nail‑substitute construction adhesive (tube with nozzle) Plan panel sizes and layout Sketch panel shapes on large paper, tape them to the wall, and adjust until the proportions feel right. Leave consistent gaps and clearances from skirting and ceiling for a balanced wall effect. Mark the wall Use a tape measure, chalk, and a spirit level to draw straight, level lines. Cover chalk lines with low‑tack masking tape to visualise the final design before fixing any wall beading. Calculate and buy moulding Measure each panel’s perimeter to estimate total linear metres. Add 10–15% extra for cuts ...